Master-Grind
SPIN INDEX FIXTURE

PROUDLY MADE IN OUR FACILITY IN THE U.S.A.
Made in the USA
ASK OUR COMPETITION IF THEY CAN SAY THE SAME.


MG-5CV-S1 Master-Grind Index Fixture - Front View

FRONT VIEW
MG-5CV-S1 Master-Grind Index Fixture - Rear View

REAR VIEW
  • V-Block and 5C collet in one spin fixture.
     
  • 72 position index plate provides a hard stop every 5° ±15 arc seconds.
     
  • Built in 2-1/2" sine bar for setting angles between hard index locations.
     
  • Horizontal or vertical v-block mounting
     
  • Spindle runs in two heavy duty 4" diameter tapered roller bearings.
     
  • Maximum spindle runout of 0.00005".
     
  • Fitted wooden case included.
     
  • Bolts directly to a SineSet® sine plate or compound sine plate of the S1 series. Also bolts to the
    AP-664-S1 90° conversion plate.
MG-5CV-S1 Master-Grind Index Fixture Drawing
FULL 24 MONTH WARRANTY
MODEL #: MG-5CV-S1
SineSet® SERIES: S1
COLLET
CAPACITY:
ALL 5C
V-BLOCK
CAPACITY:
1-5/8"
THRU HOLE: 1-1/4"
C: 3"
L1: 8-15/16"
L2: 5-3/16"
H: 5"
SQUARE &
PARALLEL:
5-1/2"
0.0002"
WEIGHT (#): 32
SHIPS VIA: UPS
PRICE (US$): $ 3,425

QUICK-ORDER COMBOS


Covered by design patent D327077.



An Inside Look at a Suburban Tool
Master-Grind Spin & Index Fixture

Master-Grind Index Fixture
An Overview

Setting an Angle Less Than 5 Degrees or
Odd Angles on a Suburban Tool Master-Grind
ACCESSORIES FOR THE
Master-Grind™ INDEX FIXTURE

  MOTOR DRIVE KIT
MG5-MD Master-Grind Index Fixture Motor Drive Kit

MG5-MD
MG5-MD Motor Drive Kit on MG-5CV-S1 Master-Grind Index Fixture MG5-MD Motor Drive Kit on MG-5CV-S1 Master-Grind Index Fixture

OPTIONAL MG5-MD ON MG-5CV-S1
  • 1/15 HP, reversible, variable speed, 60 to 300 RPM.
     
  • Can be mounted on either side of the index fixture.
     
  • Includes mounting bracket, motor pulley, drive belt & screws.


  BASEPLATE & TAILSTOCK
MG5-BTS Master-Grind Index Fixture Base & Tailstock

MG5-BTS
  • Tailstock has 1/2" diameter x 60°, spring-loaded center with locking screw.
     
  • Baseplate and edge guide are hardened and ground.
     
  • 1/2" 5C collet and 60° headstock center included.

Note:  Factory fitting of the MG5-CV-S1 to the MG5-BTS is required.   This is included at no charge, even when the Baseplate & Tailstock is purchased separately from the Index Fixture.

>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<

SEE BELOW FOR PRE-FITTED
INDEX FIXTURE and BASE & TAILSTOCK

>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<


 
MODEL #: MG5-BTS
DESCRIPTION: BASEPLATE & TAILSTOCK
LENGTH: 16-7/16"
WIDTH: 5-1/2"
HEIGHT: 4-23/32"
DIAMETRAL
CAPACITY:
5-3/4"
LENGTH
CAPACITY:
7-1/4"
WEIGHT (#): 22
SHIPS VIA: UPS
PRICE (US$): $ 1,101

PRE-FITTED  Master-Grind
INDEX FIXTURE and
BASEPLATE & TAILSTOCK
  SAVE 5% SAVE 5%  
MG-5CV-S1 Master-Grind Index Fixture on MG5-BTS Base & Tailstock

MG-5CV-S1-WBTS
  SAVE 5% SAVE 5%  
  • The MG-5CV-S1 index fixture is already pre-fitted to the MG5-BTS.
     
  • Saves the hassle of sending your index fixture back later for fitting to the baseplate & tailstock.
     
  • You save 5% off the combined individual prices.
MODEL #: MG-5CV-S1-WBTS
DESCRIPTION: FACTORY PRE-FITTED MG5-5CV-S1 & MG5-BTS
WEIGHT (#): 70
SHIPS VIA: UPS
PRICE (US$): $ 4,299

Master-Grind ™ SUPER-SET

MG5-SS
MG5-SS-BOX
  • The MG-5CV-S1 index fixture is already pre-fitted to the MG5-BTS And the motor drive MG5-MD.
     
  • Fitted Wooden Storage Box

  • Saves the hassle of sending your index fixture back later for fitting to the baseplate & tailstock.
     
MODEL # DESCRIPTION WT(#) PRICE
(US$)
MODEL #: MG5-SS
FACTORY PRE-FITTED MG5-5CV-S1, MG5-BTS
& MG5-MD.
WEIGHT (#): 90
SHIPS VIA: UPS
PRICE (US$): $ 5,900



PEOPLE WHO BOUGHT INDEX FIXTURES
ALSO BOUGHT COLLET SETS
Optional Collet Sets

OPTIONAL COLLET SETS
(Click on Picture)
REPAIR PARTS
For ALL Master-Grind™ repair parts, please view our repair parts page by clicking here.